JAECOO 7 SHS seat memory and easy entry

Supported models and trims

JAECOO 7 SHS/PHEV: Luxury / Black Luxury SHS-P, and earlier PHEV versions with the described equipment; this is not an SHS-H guide

UK manual review; not a hands-on vehicle test. A missing menu may reflect equipment or software; this guide does not promise a feature can be enabled.

Before you begin

Park safely before changing settings. Match the powertrain, equipment and screen layout to the handbook for your own car. A manual describes possible equipment; it is not confirmation that every UK trim has it.

Step-by-step instructions

1. Park and turn vehicle power to ON for the February 2026 procedure. Adjust the driver’s seat and mirrors.
2. Use the seat-memory prompt that appears on the audio screen to save or update the desired position. The manual does not name fixed slots or a hold duration for this layout.
3. Recall the required position using the seat-memory screen, keeping people and objects clear. The mirrors are recalled with the seat.
4. For easy access, open Audio System → Settings → Quick Control and enable seat easy entry/exit. The settings summary places easy access within More under Quick Control.
5. To exit, switch ON to OFF and open the driver’s door: the seat moves backwards. To enter, switch OFF to ACC/ON: it moves forwards.

Earlier layout: October 2024 handbook

1. With the car parked and READY, adjust the seat and mirrors.
2. Open Audio System → Vehicle Center → Vehicle Comfort → Seat / rear mirror position. Select Driving position, Rest position or Alternate location and long-press to save; select a saved position to recall it.
3. Enable easy access in Audio System → Vehicle Center → Vehicle Comfort. Switching READY to off and opening the driver’s door moves the seat back; powering on again moves it forward.

Why a prompt may not appear

The October 2024 manual says seat-memory/key binding must be set in the audio system and that turning binding off prevents the adjustment pop-up. It does not provide a complete binding-menu sequence, so none is invented here. The February 2026 easy-access section, marked if equipped, also warns that seat adjustment is unavailable during engine starting and that direct starting from OFF may prevent the expected movement.

Troubleshooting

• Mirrors move as well: seat and exterior-mirror positions are saved and recalled together in these manuals. Check both before saving.
• No save prompt: check the required power state, fitted equipment and the applicable screen layout. Do not assume a hidden key-binding menu exists on every revision.
• Easy entry does not move: check the enable setting and the power/door sequence below, and confirm the travel area is clear.
• Unexpected or unsafe movement: stop it with a seat-adjustment switch and have persistent faults inspected.

Safety and limitations

• Save and recall positions while parked. Check pedals, steering-wheel reach and mirrors before driving.
• Keep rear passengers, children and belongings clear of the seat’s travel. If anyone risks being trapped, operate the seat-adjustment switch to stop movement, as the manuals direct.
• Do not leave children alone in the vehicle. Seat memory and easy access can move the seat automatically.

Related controls and next steps

• JAECOO 7 petrol seat memory and easy entry →
• JAECOO 8 seat memory and easy entry settings →
• Find the correct UK handbook →
• Record a fault clearly →

Browse all controls and feature guides →